Electronics Forum | Wed Jan 07 07:50:24 EST 2009 | ludee_circuits
I think so. My customer once assembled resistors 0402 ,by Glue+wave soldering process. But PCB must be printed soldermask bridge between 0402 SMD PADs, otherwise you would encounter short problem. Sorry I don't have any comment for recommended footp
Electronics Forum | Sat Mar 14 15:48:40 EDT 2015 | horchak
The white haze is definitely an indication of moisture being trapped in uncured or improperly applied solder mask. You can verify this by heating up the board using a heat gun on an area of the board with the white haze, and if it clears up that is t
Electronics Forum | Tue Sep 11 19:04:28 EDT 2007 | hakerem
Hi Shrek - Not sure why you think adjusting dwell time and preheats is a sales pitch, but I do appreciate your candor. These are proven, widely used techniques for attacking, eliminating and preventing the recurrence of blowholes. Since it is so ea
Electronics Forum | Thu Aug 30 19:58:24 EDT 2012 | warwolf
What is the actual function of the shortwave IR in the wave machine process? Is it just another heat source?. i know it can apply a lot of heat in quick cycles and has ‘penetrating heat’ but is that it? seems a bit too simple.
Electronics Forum | Wed Feb 22 19:22:57 EST 2012 | joeherz
Give some serious thought to what your service options are for one of these machines. Senju doesn't have a big presence here in the US and I'd want to know where a serviceman would need to travel from if you get into the deep stuff.
Electronics Forum | Thu May 07 21:25:56 EDT 1998 | D.Lange
| I am running a board that is .062" thick and has components that over hang the edge of the board by .090". I have bottom side smt components (chip caps and resistors only) and use the turbulent wave to help solder the components. The problem I am
Electronics Forum | Thu May 07 13:22:37 EDT 1998 | Chrys
| I am running a board that is .062" thick and has components that over hang the edge of the board by .090". I have bottom side smt components (chip caps and resistors only) and use the turbulent wave to help solder the components. The problem I am
Electronics Forum | Thu May 07 12:29:17 EDT 1998 | Rob Williams
I am running a board that is .062" thick and has components that over hang the edge of the board by .090". I have bottom side smt components (chip caps and resistors only) and use the turbulent wave to help solder the components. The problem I am h
Electronics Forum | Mon Sep 10 12:27:32 EDT 2007 | hakerem
Hi Dave - You are correct that I was not clear in my comments. I assumed Joris had seen the usual solder balls accompanying his blowholes. Nevertheless, Joris, my first two recommendations still stand. Increasing the dwell time of your leads in t
Electronics Forum | Tue Aug 28 06:17:11 EDT 2007 | jgrootkoerkamp
I have problems with blowholes during the wave soldering process. I already find out that the stock time between reflow and wave is the most important. The longer the boards are in stock the more blowholes we have. We don't have a climat controlled
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774
